How To Update Samsung Galaxy Tab 7.0 Plus P6210 with Android 4.2.1...

How To Update Samsung Galaxy Tab 7.0 Plus P6210 with Android 4.2.1 Jelly Bean [Ultimate Guide]

Samsung Galaxy Tab 7.0 Plus P6210, now updated to latest Android 4.2.1 Jelly Bean although not official firmware. The tablet is launched back on 2011 and comes with Android 3.2 Honeycomb out of the box, recently received Android 4.0.4 ICS update and proposed to see an official Android 4.1.1 or 4.1.2 Jelly Bean update in future.. Galaxy Tab 7.0 Plus P6200 powered by a dual-core 1.2 GHz processor, a 1GB of RAM, Samsung Exynos 4210 chipset and Mali-400MP GPU. The hardware specfication is good enough to run Android 4.2.1 Jelly Bean.

Samsung Galaxy Tab 7.0 Plus P6200

Read the following instructions carefully while updating your Samsung Galaxy Tab 7.0 Plus P6210 to Android 4.2.1 Jelly Bean. Please note that each and every step mentioned in this article is important.

Disclaimer: The procedure given in this tutorial is considered as risky and may cause damage to your phone. It is recommended that you should not follow it unless you are familiar with these things. Follow this guide completely at your own risk.

I. Before You Begin:

1. The following procedure works for Samsung Galaxy Tab 7.0 Plus P6210 Tablet

2. Make sure your device have at least 80% battery power. [Guide]

3. You must have ClockworkMod Recovery installed on your device. [Guide]

4. Make sure USB Debugging is enabled

5. Backup your EFS Folder. [Guide]

 

II. Downloading Required Files:

  1. Android 4.2.1 CM10.1 for Samsung Galaxy Tab 7.0 Plus P6210 [Filename: cm-10.1-20130109-UNOFFICIAL-p6210.zip]
  2. Google Apps [Filename: gapps-jb-20121212-signed.zip]

III. Install Android 4.2.1 Jelly Bean ROM:

1. Connect your Samsung Galaxy Tab 7.0 Plus P6210 to PC using USB cable.

2. Copy downloaded files to the SD card of your Phone.

3. Disconnect USB

4. Turn off your Tablet.

5. Boot into recovery by pressing and holding Volume Down, Home and Power buttons

6. Wipe the Data and Dalvic Cache or you might brick your device afterwards

7. Select install zip from sdcard, then select choose zip from sdcard. (Locate the Jelly Bean 4.2.1 Rom.zip file) and select it by pressing Power button.

8. Once the ROM installation process end, repeat the step 7 but choose Google apps instead of ROM zip to install the Google apps package.

9. When installation is completed, go back to the main recovery menu and select reboot system now to reboot the phone and boot up into customized Android 4.2.1 ROM

Congrats! Android 4.2.1 Jelly Bean firmware based custom ROM is now installed and running on your Samsung Galaxy Tab 7.0 Plus P6210 tablets

If you enjoyed this article, Get email updates (It’s Free)

NO COMMENTS

Leave a Reply