Home Android How To Update Samsung Galaxy Ace Plus S7500 to Android 4.2.1 Jellybean...

How To Update Samsung Galaxy Ace Plus S7500 to Android 4.2.1 Jellybean [Ultimate Guide]

69 46463

Samsung Galaxy Ace Plus S7500 won’t going to see official Android 4.2 Jelly Bean ever due to its hardware specification but the latest Android 4.2.1 Jelly Bean update is now possible for Samsung Galaxy Ace Plus S7500 although not officially.

Samsung Galaxy Ace Plus S7500

Read the following instructions carefully while updating your Samsung Galaxy Ace Plus S7500 to Android 4.2.1 Jelly Bean. Please note that each and every step mentioned in this article is important.

 Disclaimer: The procedure given in this tutorial is considered as risky and may cause damage to your phone. It is recommended that you should not follow it unless you are familiar with these things. Follow this guide completely at your own risk.

I. Before You Begin:

1. The following procedure works for Samsung Galaxy Ace Plus S7500 smartphones.

2. Make sure your device have at least 80% battery power.

3. You must have ClockworkMod Recovery installed on your device.

4. Make sure USB Debugging is enabled

II. Downloading Required Files:

1. Jelly Bean 4.2.1 ROM for Samsung Galaxy Ace Plus S7500 

2. Google Apps 

III. Install Android 4.1.2 Jelly Bean ROM on Samsung Galaxy Ace Plus S7500:

1. Connect your phone to PC using USB cable.

2. Copy downloaded files to the SD card of your phone.

3. Disconnect USB

4. Turn off your phone

5. Boot into recovery by pressing and holding Volume Down, Home and Power buttons

6. Wipe the Data and Dalvic Cache or you might brick your device afterwards

7. Select install zip from sdcard, then select choose zip from sdcard. (Locate the Jelly Bean 4.2 Rom .zip file) and select it by pressing Power button.

8. Once the ROM installation process end, repeat the step 7 but choose Google apps instead of ROM zip to install the Google apps package.

9. When installation is completed, go back to the main recovery menu and select reboot system now to reboot the phone and boot up into customized Android 4.2.1 ROM

Congrats! Well known and super customize Android 4.2.1 Jelly Bean firmware based custom ROM now installed and running on your Samsung Galaxy Ace Plus S7500.

Update Samsung Galaxy Ace Plus S7500 to Android 4.2.1 Jellybean -Custom Kernel

If you enjoyed this article, Get email updates (It’s Free)

69 COMMENTS

  1. Solo quiero saber si esta actualizacion sirve para la version de galaxy ace plus S7500L pues es ese el modelo que poseo, me dara problemas si le cargo ese firmware o rom siendo para el S7500… ayuda por favor pues me gustaria actualizarlo a jellybean, y que problemas me daria al instalarle la de la version de telefono S7500

  2. After installing this jelly bean version , My phone is rebooting in recovery mode. any suggestions to rollback to previous version of this phone ?

  3. in the last step when i rebooted my phone and when it opened it gave me white screen and didn’t work what should i do ??!

  4. Finally there is a way to get jelly bean on your Samsung galaxy ace plus.But first ensure that your phone is rooted.Open the following link http://goo.im/devs/thewhisp/trebon-cm10.1 and download the file given in it.
    boot into clock work mod recovery.
    Select wipe data and factory reset
    Select wipe cache
    Go to advance and select wipe dalvik cache
    Then select install zip from SD card and choose the file which you had downloaded earlier,if u don’t find it over there go back and select zip from internal SD card and search each and every folder until you find it.
    Once u find it install it
    And reboot your phone and you will get jelly bean
    POINTS TO BE NOTED
    1.In this you won’t be able to sign in to your Google account
    2.The phone will not be able to access the camera
    3.You won’t have the play store app
    4.To download apps install black mart alpha or something like that
    5.Don’t blame me if anything goes wrong
    6.Make sure to make a back up of your contacts SMS and other stuffs as they will all be erased.For contacts copy them to sim card as the phone will not be able to access your Google contacts

  5. im stuck on the recovery mode !,, help.. everytime i reboot my phone, it entering the recovery mode,, help,, how can i get out??

  6. What all does work on this.. Is everything compatible??
    I have an ace plus.. N i am a beginner…
    So help please.. Pune, India!

  7. i updated my mobile but i have 3 problems
    1 – google play stopped working
    2 – keyboard stopped working
    3 – web browser is not opening

    am stuck here
    can anyone help me ?

  8. Please check your Samsung Galaxy Ace Plus S7500 Android 4.2.1 Jellybean software ( your download link ) I downloaded your Samsung Galaxy Ace Plus S7500 Android 4.2.1 Jellybean software but I got Samsung Galaxy copper software………..Please check your download link……….Please tell me how to get Samsung Galaxy Ace Plus S7500 Android 4.2.1 Jellybean software….Please help me, think……….

  9. that’s uncompetable for galaxy ace plus…
    recovery galaxy ace plus>> press and holding volume up and down + home key + power button.

    please cek again.

  10. Can some one confirm that this ROM is working. I am downloading it now and I am using Samsung Galaxy Ace Plus mobile.

  11. Error at line 7
    this update is for galaxy ace s5830….
    But it works for S7500
    Pls Provide with the deleted lines in the Rom
    Coz deleting 3 lines aint helping.
    Thanks

  12. getprop(“ro.product.device”) == “cooper” || getprop(“ro.build.product”) == “cooper” ||
    getprop(“ro.product.device”) == “GT-S5830″ || getprop(“ro.build.product”) == “GT-S5830″);
    deleting these lines aren’t fixing it Broo.. plzzz uplod the pic what to delete.. sOoonn.. :)

  13. hey bro can u please show us what to del from this method.. Pleaseee…
    1. Open the ROM zip using 7-zip or WinRAR

    2. Navigate to meta-inf/com/google/android & Extract the updater-script.

    3. Open updater-script using Notepad++ & delete the lines that contains the “getprop…” (3 lines)

    4. Save the file.

    5. Drag it back to the Original zip (the same directory from where you’ve extracted it) using 7-zip and confirm.
    Enjoy Flashing.

  14. Please report if any one has successfully flashed the rom …evryone with ace plus is waiting eagerly for a jelly bean update …

    • Yess.. i have installed and the ROM is working flawlessley on my GT-S7500!!!!
      Thanks for the uploader!!!!!!!!!!

      • Buddy, Can you provide details on what did u exactly modify in the script? if u can comment back on this, it’ll be really helpful for all of us waiting for the JB update. Tx =)

      • Hi, can you please guide us how to install. Did you modified the script. If so can you please upload the modified script. Thanks in advance.

      • Kailas.

        Is your S7500 still working on this rom?
        I am struggling to make the zip file again so that the phone reads it.

  15. dear any one tell me how many time take it this upgrade plzzzzzz

    help me my ph show only downloading only plzzzzzzzzzzz help me

  16. Frenz, I tried by deleting the 3 lines to fix the status 7 error, it still stuck with the same error.
    I tried by replacing the “S5830″ in the updater script to “S7500″, which again did not let me flash the ROM. My phone is rooted & has CWM. Is there anything else someone tried & got it working? Pls let us know. Thanks!!

    • Whats is the error message displayed??

      Please check this point is followed or not??
      1. You must have ClockworkMod or any other Recovery installed on your device.
      2. You must have rooted device used.

      • does this ROM work for you?
        what all is not supported??? isnt this the galaxy ace S5830′s ROM???????

    • How to Fix Status 7 Error while Installing ROMs

      1. Open the ROM zip using 7-zip or WinRAR

      2. Navigate to meta-inf/com/google/android & Extract the updater-script.

      3. Open updater-script using Notepad++ & delete the lines that contains the “getprop…” (3 lines)

      4. Save the file.

      5. Drag it back to the Original zip (the same directory from where you’ve extracted it) using 7-zip and confirm.
      Enjoy Flashing.

Leave a Reply